How to press Standard DTF

Here you’ll find a collection of pictures, text, and a video showing you exactly how to press Standard DTF transfers. Step-by-step instructions to help you achieve perfect results every time!

  • Press

    Set your heat press to 150°C for cotton, or 130°C for polyster. Press the transfer onto your garment for 3-5 seconds with medium to firm pressure.

  • Peel

    Allow the transfer to cool slightly, then peel off the film smoothly.

  • Finish

    Repress with a Teflon sheet or parchment paper for 3-5 seconds to lock in the design and enhance durability.

How to apply UV DTF

Here you’ll find a collection of pictures, text, and a video demonstrating how to apply UV DTF transfers. Follow these easy steps to get vibrant, durable prints on various surfaces!

  • Peel & Place

    Carefully peel the clear film with the design and position it onto your surface. Ensure it is smooth and free of air bubbles, and your suface is clean.

  • Press & Apply

    Firmly press down using a squeegee or your hand to ensure full adhesion to the surface.

  • Remove Film

    Leave to set for 5-10 minutes. After time, slowly peel away the transfer film, leaving behind a vibrant, durable UV print that’s ready to go!

How to press Blockout DTF

Here you’ll find a collection of pictures, text, and a video showing you how to press Blockout DTF transfers. Follow these simple steps to achieve crisp, vibrant prints on sublimation-dyed polyester garments!

  • Prep & Press

    Place a cotton pad on the heat press, then position your garment on top. Smooth out any wrinkles and place the Blockout DTF transfer in your desired position.

  • First Press

    Cover with a cotton overlay and press at 140°C for 10 seconds. Let it cool slightly, then peel the film off.

  • Final Press

    Place the used film back on the print, cover with the cotton overlay, and press again for 5 seconds at 140°C to seal the design.

How to press Powderless DTF

Here you’ll find a collection of pictures, text, and a video showing you how to press Powderless DTF transfers. Follow these easy steps for a smooth, soft, and durable print on polyester garments!

  • First Press

    Place your garment on the heat press, position the Powderless DTF transfer, and press at 130-140°C for 10 seconds.

  • Ice Cold Peel 

    Let the transfer cool completely until ice cold, then smoothly peel off the film.

  • Final Press

    Cover with a finishing sheet and press again for 5 seconds at 130-140°C to lock in the design.